pH Water Power

Regulates water pH, neutralizes negative impact of hard water, acts as a surfactant.

  • Acidifies water;
  • Facilitates pH indication by color change;
  • Softens hard water;
  • Acts as a binding agent;
  • Increases stickiness;
  • Improves the compatibility of the components of the mixture;
  • Protects the sprayer from deposits;
  • Increases the absorption of micronutrients by plants;
  • Does not generate additional foam and fights with existing one.
Pakuotė: 5 L, 20 L Produkto forma: Liquid

Norite užsakyti produktą? Skambinkite tel. 8 664 75297

    * Privalomi laukeliai.

    40-50% - mixture of acids, 10-20% - mixture of ionic and non-ionic surfactants, 0.10-0.25% - indicator.

    Fill a sprayer tank half full with water and turn on mixing. Add the required amount of pH water Power first, followed by other components. Fill the sprayer tank fully with the remaining amount of water; mix continuously. Add additional pH water Power if needed depending on the color of the solution. Prepared solution must be used immediately.

    Measure pH of water intended for spraying and select suitable application rate in the table below:

    pH of water Amount of pH Water Power, g (100 l of water in order pH to reach 5,5)
    9,0 100
    8,5 90
    8,0 80
    7,5 70
    7,0 60
    6,5 50
    6,0 40
    Rates of pHwater Power may vary depending on the effect of chemical properties of water and other agents used on pH of a solution.

    Kiti šios kategorijos produktai

    Peržiūrėti

    Periplus Leaf

    Organosilicone superspreader, penetrant. Important: Use Periplus Leaf with nitro...

    Peržiūrėti

    Targetum

    Surfactant to reduce spray drift.

    Peržiūrėti

    Lignum

    Bonding agent.

    Peržiūrėti

    Periplus

    Double-acting silicone wetting agent affecting both water and oil properties.